Picking the Best Landscape Edging to Use Around Beds and Lawns

Mulch migrates, grass creeps, and a freshly dug flower bed can look ragged within a single season if nothing holds the line. The best landscape edging to use is whatever keeps that boundary crisp with the least maintenance for your soil, your mower, and your patience. A tight curve around a tree ring has different needs than a long straight run along a driveway, and one product rarely handles both equally well.

This guide compares six edging products across plastic, rubber, steel, and block styles, using what each name tells you and generic buying rules for the rest. Before shopping, walk the border, mark the curves, and decide whether you want a hidden edge or a visible feature. As of 2026, the most common mistake remains buying edging that is too shallow for the soil, so depth and installation method matter as much as the look.

Quick Picks

How to Choose

Match the material to the climate

Plastic and resin resist rot and rust but can become brittle after years of freezing and thawing. Steel and aluminum hold a crisp line, though untreated steel can rust. Rubber stays flexible in cold weather and tolerates mowers rolling over it. A good rule of thumb: in regions with hard winters, choose flexible rubber or thick-wall plastic; in dry, sunny regions, check that plastic is labeled UV resistant.

Check the edge height and depth

Edging should extend at least 4 inches into the ground to resist heaving and prevent roots or grass from creeping underneath, and stand a couple of inches above grade if you want mulch contained. Thin, shallow strips tend to pop up in spring. For beds with deep mulch, pick a taller product so the mulch does not spill over the top.

Decide on the installation method

No-dig products use spikes or a surface anchor and install quickly, but they may shift in soft soil. Trench-set edging requires digging a small channel, then burying the base, which gives a stronger hold. If you plan to mow right up to the edge, a trench set or block border gives a mower-friendly lip that keeps the wheels from scalping the lawn.

Think about curves and straight runs

Rigid sections work for straight lines, while flexible rolls bend into tight curves. If your beds have radius curves under about two feet, choose a flexible roll or a block that can be fanned out. Check the length of each piece and the connector style, because weak connectors become the weak points on long runs.

Our Picks Reviewed

Dimex EasyFlex No-Dig Landscape Edging

The EasyFlex line from Dimex is sold as no-dig edging, which suits gardeners who want a fast border without cutting a trench through the lawn.

• Pro: The no-dig label means installation is quick, which saves effort on large beds or when you are redoing several borders.
• Pro: A flexible product name suggests it bends around curves, making it useful for rounded flower beds and tree rings.
• Con: No-dig edging relies on stakes or anchors, so it can shift or lift over time in soft soil or after repeated freeze and thaw cycles.

Skip it if you want a permanent, locked-in border along a driveway or sidewalk where heaving would be an eyesore. Gardeners with heavy clay or very rocky ground should also expect difficulty setting stakes deeply, and a trench-set product will hold better there.

Master Mark Terrace Board Landscape Edging

Master Mark Plastics sells Terrace Board edging, a long-established style that offers a defined border and a decent barrier for mulch and soil.

• Pro: A purpose-built board style gives a more structured look than a thin bendable strip, which suits formal garden beds.
• Pro: Plastic edging does not rot, so you avoid the replacement cycle typical of wooden timbers.
• Con: Rigid board edging can look stiff on curves, and tight radii may require cutting relief notches or using shorter sections.

Skip it if your garden is full of small, tight curves or you prefer an almost invisible edge. Anyone who wants a stone or brick look will likely find a plastic board too utilitarian for the design. Gardeners who plan to mow right against the border should confirm the top lip is rounded and smooth.

Suncast Resin Landscape Edging

Suncast is a familiar outdoor brand, and its resin edging is a straightforward option for homeowners who want a simple plastic border.

• Pro: Resin is named right in the title, a material that resists rot and does not need staining or sealing like wood.
• Pro: A mainstream outdoor brand makes the product easy to find at home improvement and garden centers.
• Con: Plastic edging can fade or become brittle under years of strong sun, so check if UV resistance is part of the description.

Skip it if you want an edge that will last decades with no replacement, or if you live in a place with extreme heat or freezing. Perfectionists who dislike the look of plastic may prefer metal or stone. It is also worth reading the description for thickness and stake count, since those details decide how well it holds.

ProFlex Landscape Edging

ProFlex is a dedicated landscape edging name, and the term flex points to a product meant to bend around curved beds and rings.

• Pro: Flexible edging handles curves smoothly, which suits informal gardens and circular borders around trees or lamp posts.
• Pro: A single-purpose edging brand tends to offer accessories such as stakes and connectors in the same system.
• Con: Flexible strips can wave or lean if not set at a consistent depth, so the line needs careful installation.

Skip it if you have long straight borders where a rigid product gives a crisper line. Homeowners who plan to run a mower heavily against the edge should also check how well the product handles repeated wheel contact. Gardeners with long beds should also count how many connectors and stakes a full run will need.

EverEdge Landscape Edging

EverEdge is a named edging product line known in garden circles for creating a clean, defined separation between lawn and bed.

• Pro: A dedicated edging line means the sections, connectors, and stakes are designed to work together for a neat finish.
• Pro: Clean lines make beds look intentional, which can lift the appearance of a front yard with minimal plant changes.
• Con: Premium-style edging often requires careful trenching and leveling, which takes more time than quick no-dig strips.

Skip it if you want a weekend job done in an hour or you plan to move beds often. Renters or people who may redesign their yard soon are better with a lighter, removable option. Anyone who dislikes digging should plan on renting or borrowing a trenching tool so the job does not stall.

Pavestone RumbleStone Block

Pavestone’s RumbleStone is a concrete block with a tumbled stone appearance, used for raised borders and low retaining edges rather than flat strips.

• Pro: Block edging creates a visible, sturdy border that doubles as a design feature rather than disappearing into the lawn.
• Pro: Concrete products resist rot and rust, and they handle foot traffic and mowers better than thin plastic.
• Con: Blocks are heavy and need a level base, so installation is slower and more physical than rolling out plastic edging.

Skip it if you want a nearly invisible border or you have limited strength for hauling blocks. Anyone with a very long run should compare the cost and labor against rolled edging before committing. Plan for delivery or a truck, since a pallet of block weighs far more than a few rolls of plastic.

Which One Fits

• Quick fix for curved beds: Dimex EasyFlex or ProFlex.
• Formal, structured borders: Master Mark Terrace Board or EverEdge.
• Simple plastic border on a budget: Suncast Resin.
• Raised, decorative edge: Pavestone RumbleStone Block.
• Using a saw to trim wood or plastic sections: see our jigsaw for cutting curves guide.
• Storing tools and stakes in the garage: a durable jobsite box keeps everything in one place.

Whatever you choose, set a string line or use a garden hose to lay out the shape before digging. Standing back and looking at the hose line from the street or patio saves you from reinstalling a crooked border, and the sketch costs nothing.

Cost per foot is worth calculating before you commit. Measure the full run, add ten percent for waste and overlaps, and compare the cost of the border plus stakes, connectors, and any base material. A cheap strip that needs replacement in three years can cost more over a decade than a sturdier edge installed once, especially along high-traffic lawn boundaries where repairs are most annoying.

Common Mistakes

1. Installing edging too shallow, so frost and roots push it out of the ground.
2. Skipping a weed barrier or edge trench, which lets grass creep beneath the border.
3. Choosing rigid edging for tight curves and ending up with flat spots.
4. Letting the top edge sit too high for the mower, which snags wheels.
5. Not leaving gaps for drainage, so water pools behind the border.

FAQ

How deep should landscape edging be buried?

A common target is 4 inches or more below grade, with a couple of inches visible above the soil.

Can I install edging without digging?

No-dig products exist, but trenching gives a more stable result in most soils.

What is best for curves?

Flexible rubber or plastic rolls bend smoothly, while rigid boards and blocks work better for straight or gently curved lines.

Will edging stop grass from spreading?

A deep edge helps, but you still need to trim or pull runners that cross the top.

What tools help with installation?

A flat spade, rubber mallet, and a saw for trimming sections; our jigsaw guide and jobsite box picks can help.